westag_pfeil
Deutsch English

RS Special, oiled

RS Special, oiled for low-pore  concrete surfaces with increased rim strength. Suitable for use in sewage treatment plants, water containers, and bridge building. The 10 mm thick panel is suitable for round formwork with a radius of more than 1.5 m.

An overview of the main properties and benefits of our “RS Special, oiled” shuttering board:

  • low-cost supersize formwork
  • panel made of a highly compacted wooden composite substrate with a sanded and absorbent surface
  • It should not be used without a release agent
  • On request: Factory pre-treated with environmentally compatible release agent to WGK 1 (permit W-178539)
  • Without edge sealing

 


Technical dataDimensions in mmThickness mmWeight kg/m²Modulus of elasticity (N/mm²)Bending strength (N/mm²)
    alongacrossalongacross
RS Special, oiled

5430/2710 x 2050

10

21

27

7.8

16.5

21.50

4000

4500

4000

4000

4500

4000

27

30

26

27

30

26

Dimensions pre-edged (approx. specification)
Subject to design modifications. Attention Reference values – these properties are not guaranteed.

Diagram for bending estimation

Technical advice: Area load calculated from pure concrete pressure without safety coefficients. Diagram applies to a 4-field beam, deflection in the outfield. Permissible bending stress = calculated with load safety factor 1.5 / load duration 0.9 / material safety 1.3. The technical data are mean values which may vary due to the natural fluctuations of the raw material wood.


Westafill-Fugenband

Das einseitig selbstklebende Fugenband auf Polyäthylen-Basis ist ca. 19 mm breit und 3 mm dick. Es wird zum Abdichten von Schalungsplattenfugen verwendet. Die Rollenlänge des Westafill-Fugenbandes beträgt 10 m.

Westafill-Spezial-Spachtelharz

Die hochwertige Zwei-Komponenten-Spachtelmasse auf Epoxidharz-Basis eignet sich für den Schalungsbau, vor allem für die Anwendung bei sämtlichen filmbeschichteten Sperrholzschalungsplatten von Westag & Getalit.

Westafill Speziallack

Der verarbeitungsfertige Ein-Komponenten-Lack auf Polyurethan-Basis besitzt eine hohe Abriebfestigkeit, Schlagzähigkeit und Chemikalienbeständigkeit. Er dient als Kantenschutz für Schalungsplatten aus Holzwerkstoffen.


The Standard in Concrete Construction

The Standard in Concrete Construction

Download

246

Would you like further information about the supersize formwork panel “RS Special, oiled”? Just contact our service team, who will be happy to advise you in writing or by telephone. The button below will take you to the contact data for the experienced contact persons at Westag & Getalit AG. Your questions will be answered as quickly as possible.

To contact

Other products

Westaspan 300

Westaspan MF

Phenox special 200/360

Phenox NFO 500

Magnoply MF

Other topics