westag_pfeil
Deutsch English

Wooden composite boards

When manufacturing supersize formwork panels with wooden composite substrates as the middle layer, we pay particular attention to high bulk densities and a low swelling index.

RS Special

For poreless concrete surfaces with improved strength on the concrete edges for the construction of sewage treatment plants, water tanks and bridges. The 10 mm thick panel is suitable for round formwork with a radius of more than 1.5 m.

To the product

Westaspan 300

For all smooth, jointless concrete surfaces in accordance with DIN 18020/3, line 4/5. Low-cost supersize formwork panel with melamine resin coating and sealed edges. Application with low numbers of reuses.

To the product

Westaspan MF

For all smooth, jointless concrete surfaces in accordance with DIN 18020/3, line 4/5. Low-cost supersize formwork panel with melamine resin coating and sealed edges. High number of reuses.

To the product

Westaspan Super 400

Westaspan Super 400 is suitable for all smooth, jointless concrete surfaces in accordance with DIN 18202/3, line 5/6. Use with exposed concrete requirement SB3 and multiple reuse.

To the product

Phenox special 200/360

For all smooth, jointless concrete surfaces in accordance with DIN 18202/3 line 5/6 with higher requirements. Supersize formwork panel with melamine resin coating and sealed edges.

To the product

Phenox NFO 500

For all smooth, jointless concrete surfaces in accordance with DIN 18202/3 line 5/6 with higher requirements. Supersize formwork panel with special film coating Can be used without a release agent.

To the product

Magnoply MF

Suitable for smooth, jointless concrete surfaces in accordance with DIN 18202/3, line 5/6. Three-ply supersize formwork panel with alkali-resistant melamine resin coating. Reduced water permeability and increased light resistance. Used to produce matt, even surfaces.

To the product

Bonaply 260

Suitable for smooth, jointless concrete surfaces. Cost-effective three-ply supersize formwork panel with phenolic resin coating and sealed edges. Produces matt surfaces with a limited number of reuses.

To the product

Do you have questions about our supersize formwork panels and how they are machined? Or do you have suggestions for new and innovative developments in this exciting segment? Simply contact our skilled staff, who will be happy to handle your concern and answer you as quickly as possible. The button below will take you quickly and directly to the service team at Westag & Getalit AG.

To contact

References

Product areas